Now we can offer a complete family
of Anthropomorphic Test Devices (ATD's) commonly known as Crash Test
Dummies for use in the vehicle safety industry with a major emphasis
still on the automotive markets but again expanding into the fields
of aerospace, aviation, biomechanics and various segments of science
and research.
All of the various Anthropomorphic Test Devices available are tested
and certified to regulatory specifications and safety standard
guidelines and they are fully instrumented with calibrated precision
load cell devices.
Adult
Frontal Impact ATD's
Hybrid II - 50th Percentile Male
Hybrid III - 50th Percentile Male
Hybrid III - 95th Percentile Male
Hybrid III - 5th Percentile Female
Thor - 50th Percentile Male
Thor - 5th Percentile Female
Erwachsene
Seitenstoß-ATD's (Adult Side Impact
ATD's)
BioSID (Side
Impact Dummy)
SID (Side Impact Dummy)
SID-H III (SID dummy with a Hybrid
III head and neck)
EuroSID-1
Special
ATD's
FAA-Hybrid III 50th Percentile Male
BioRID II Rückstoßfigur (Rear Impact
Dummy)
Pedestrian
Polar pedestrian
HURD 116/ 132/ 202/ 212
Child ATD's
Hybrid II - 3 year Old Child
Hybrid II - 6 year Old Child
Hybrid III - 3 Year Old Child
Hybrid III - 6 Year Old Child
CAMI and CAMI-N (New-born Infant
Child)
CRABI (Child Restraint Airbag
Interaction) 12 Month Old
Instrumented 2.5 kg infant dummy
General ATD Informations
The Hybrid II and III family of dummies
Consists of a 3-year-old, 6-year-old, 10-year-old, small adult
female, mid-sized adult male and large sized adult male. These
dummies are all designed for use in (FIT) - frontal impact testing
of automotive restraint systems. The 3-year-old, 6-year-old, small
female and mid-sized male are also specified for (FIC) - frontal
impact compliance testing.
Side-Impact Dummy (SID)
The first SID was developed in the 1970s for the NHTSA. SID, a
Hybrid II-type dummy with an adapted thorax, is the official dummy
used in government-required side-impact testing of new cars. These
dummies primarily measure injury risk to the head, chest and pelvis.
SID II's
These were created by the Occupant Safety Research Partnership of
USCAR, an U.S. consortium. SID II's represents a small female who is
5 feet tall and 110 pounds, and is a scaled-down version of BioSID.
BioSID
This dummy is based on a torso design by General Motor's researchers,
in collaboration with the SAE Company.
It has more sensors and a more biofidelic (human-oid) body than a
SID/Hybrid III, thus allowing engineers a better assessment of the
risk of injury to internal organs.
It utilises a Hybrid III's head, neck and legs and is instrumented
to assess the potential for head, neck, shoulder, abdominal,
thoracic, pelvic and leg injuries.
BioRID and RID-2
These are mid-sized male dummies being developed in Europe for
assessing the potential for "whiplash"-type neck complaints in
low-speed rear-end impacts.
EuroSID and EuroSID-2
The European Experimental Vehicles Committee developed this
variation of SID in the mid-1980s, and is used to determine
compliance with side-impact requirements within Europe. An updated
version is called EuroSID-2.
For testing restraint system effectiveness in frontal crashes,
Europe uses the Hybrid III dummy.
WorldSID
As the auto industry becomes more global, this ongoing worldwide
effort, led by the International Standard-isation Organisation, aims
to develop a harmonised side-impact dummy that will be useable
throughout the world.
CRABI
The Child Restraint Air Bag Interaction dummy is used to evaluate
air bag exposure to infants restrained in child safety seats that
are placed in the front seat.
CRABI dummies come in three sizes: six-month-old, 12-month-old and
18-month-old.
Our Address
ETD Owner: Robert Berwick
Vossn Weg 4,
Hittfeld,
D-21218 Seevetal Germany
Fon +49 (0) 4105 2008 /9
Fax +49 (0) 4105 2000
ISDN +49 (0) 4105 635120
Mobile +49 (0) 173 928 4925
Crash-Test-Dummies
On this site you can
can find, in condensed form, a short summary
about Anthropomorphic Test Devices (ATD´s),
commonly known as Crash-Test-Dummies,
If you need further detailed information, movies that you can
download and further input about crash-tests in general, as well as
links to firms such as ADAC, DEKRA or Autoliv, please visit our
separate website:
Cannot find what you are looking for? Please contact us for
assistance.
We also offer the following additional services.
This includes maintenance, training and technical support for crash
test dummies, load cells, accelerometers and other dummy laboratory
calibration equipment. Complete unit calibration, repair and systems
integration is included.